ANYCUBIC 3D Printer Wash and Cure 3 Plus, Larger 2 in 1 Wash Cure Machine for ANYCUBIC Photon Mono 6Ks Mars with Gooseneck Lights, IPA-Saving & Efficient Curing, Washing Size 8.97” x 5.04” x 10.24” L-Wash and Cure 3 Plus

【Size Upgraded, Capacity Increased】Compared with Anycubic wash & cure plus, wash and cure 3 plus’s washing basket volume is increased by about 13.4% to 7.6L, and total volume of the washing bucket is 12L, which is suitable for LCD 3D printers of 10.6'' and below.
【Partial Enhanced Curing】The innovative Flexicure gooseneck lights increases the energy value by 30,000uW/cm²over a 1-3 cm irradiation range, thus taking good care of delicate areas such as the top of the model or figure details.
【Better Overall Curing】Anycubic Wash & Cure 3 Plus adopts a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20% improvement in curing uniformity compared to wash&cure plus, thus 3d models can achieve better quality and consistency after curing.
【Dual-Layer Design, Saving and Efficient】The platform cleaning mode of wash & cure 3 plus is equipped with two adjustable heights of 150mm and 250mm, allowing the printing platform to range from 6.6'' to 10.3'', maximizing alcohol usage efficiency.
【Simple Operation, Easy to Use】Cleaning and curing dual mode in wash and cure 3 plus, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Cleaning and curing time can be easily adjusted from 1 to 30 minutes at will.