ELUTENG PCIe NVMe Adapter M.2 PCI-e to NVME SSD Expansion Card Supports PCI-Express X1 X4 X8 X16 Slots M.2 Adapter with Heat Sink Low Profile Bracket Support 2230 2242 2260 2280 SSD

【PCIE NVME adapter】Compatible with M.2 PCIE (NVMe) M-Key/B&M key SSDs. *Note: M.2 NGFF (SATA) is not supported; PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting.
【Effective Heat Dissipation】Aluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of the SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive.
【Wide Compatibility Support】PCIe 1X 4X / 8X / 16X. M.2 NVME to PCIE adapter card, corresponding to M-Key / B&M-key. *Note: Not support MSATA and B KEY interface.
【High Speed Transfer】The M.2 to PCIE adapter card uses NVMe protocol and takes the PCI-E channel, with a maximum read/write speed of 16Gb/s (theoretical value), greatly reducing the transfer time of large files. ※Note: The actual transmission speed depends on the interface and working environment of the device.
【Safe and Stable】Solid-state capacitors are used for voltage regulation, which prevents current waves from being generated in the event of SSD damage. It can operate stably under high and low temperature conditions to protect the hard disk. PCIE to M.2 adapter size: 140*35mm (L*W), compatible with Windows 7/10/11 system, no driver is needed for win8 and above system, driver is needed for SSD in win7 and below system.