Recommended

I was skeptical about the OVERTURE Matte PLA Filament (Matte Blue) after reading some negative reviews, but I decided to give it a try due to its affordability. The order process was smooth, and the packaging was well-sealed, ensuring the filament was fresh. My experience with it on my Creality Ender 3 has been fairly positive. The dimensional accuracy is decent, and I didn’t face any clogging issues.

The matte finish is a great touch and hides print lines nicely. Would recommend for small projects.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

I recently switched to OVERTURE Matte PLA Filament for my prints, and while it's not perfect, it gets the job done for the price. Using an Anet A8, I found that dialing in the right settings (around 200C nozzle and 60C bed) helped minimize issues. Initially, bed adhesion was a problem, but once I adjusted my z-height, it worked like a charm. The matte finish looks good and gives a professional touch to my prints.

4

Shipping

5

Item Quality

5

Customer Service

4

Packaging

Not bad at all! I was expecting issues with clogging after seeing other reviews, but my NOZZLE on the Prusa i3 MK3S handled it well at 220C. The initial layers were a bit tricky, and I did have some bed adhesion problems, but adjusting the temperature and running a quick calibration fixed that. The blue matte finish really pops, and now it's my go-to filament.

5

Shipping

4

Item Quality

4

Customer Service

5

Packaging

I was underwhelmed by the OVERTURE Matte PLA Filament. Although the packaging was excellent and the filament appeared high quality, I faced significant issues with bed adhesion on my Ender 5 Pro. Even after adjusting the bed temperature to 65C and the nozzle to 210C, the filament curled at the edges.

Eventually, I got decent prints, but it needed a lot of fine-tuning.

5

Shipping

5

Item Quality

4

Customer Service

5

Packaging

Overture's Matte PLA Filament in blue is a solid option if you’re looking for an affordable filament with a nice matte finish. I’m using it with an Anycubic i3 Mega S, and after some initial clogging issues, it printed well once I adjusted the settings to 215C for the nozzle and 60C for the bed. Prints come out with minimal visible lines, and the color is consistent.

5

Shipping

5

Item Quality

4

Customer Service

5

Packaging

Recommended

This filament is exceptional for the price. I faced initial hurdles with clogging, but after heating the nozzle to 220C on my Ender 3 V2, prints went smoothly. Bed adhesion was perfect at 60C.

The matte finish hides lines effectively, making my final products look professional. Highly recommended for anyone looking for an affordable yet decent filament.

5

Shipping

4

Item Quality

4

Customer Service

5

Packaging

The OVERTURE Matte PLA Filament in Matte Blue has been a mixed bag for me. The order and delivery were prompt, and the packaging was intact. However, print quality on my CR-10 was inconsistent, with frequent nozzle clogs at 200C. After some trial and error, raising the temperature to 220C made a noticeable difference, but it’s still not perfect.

4

Shipping

5

Item Quality

5

Customer Service

4

Packaging

As a hobbyist, I’m always on the lookout for good-quality yet affordable filaments. The OVERTURE Matte PLA Filament met my needs fairly well. The blue color is vibrant, and the matte finish adds a professional look to my models. It did take a few tries to get the settings right, but once optimized to 215C on my Monoprice Select Mini, the results were impressive.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

Not bad for a budget filament! I picked the OVERTURE Matte PLA Filament in blue for my new projects on Creality CR-10 V3. Packaging and delivery were prompt. Initial prints were problematic with nozzle clogs, but after boosting the temp to 220C and recalibrating the bed, the prints came out fine.

The matte finish is a nice touch.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

The OVERTURE Matte PLA Filament provided good results for me once I fine-tuned my settings on my Bambu Lab A1 mini. Using the pre-set settings in Bambu Studio made a significant difference. Bed adhesion at 60C and nozzle at 219C produced smooth, clean prints.

The matte blue filament hides print lines well, making my projects look exceptionally good.

4

Shipping

4

Item Quality

5

Customer Service

5

Packaging

I purchased the OVERTURE Matte PLA Filament with some reservations, given the mixed reviews. My experience has been fairly positive with minimal clogging issues using a Creality Ender 3 with a nozzle temp of 215C. It did require some tweaking, but once dialed in, the filament produced consistent, aesthetically pleasing matte prints.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

After reading quite a few reviews, I found that the OVERTURE Matte PLA Filament could be finicky. On my Sidewinder X1, I had to set the nozzle to 220C and the bed to 60C to get decent results. The print quality is good after getting the settings right, but it took a bit of effort.

The matte finish is quite appealing.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

I’m using the OVERTURE Matte PLA Filament on my FlashForge Adventure 3, and it has been decent. The filament had some clogging issues at first, but increasing the nozzle temperature to 220C solved that. Bed adhesion was fine at 60C, and the matte finish gives a nice touch to my prints.

It’s affordable and decent for small projects.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

The OVERTURE Matte PLA Filament surprised me. I had issues with nozzle clogs initially, but once I set my nozzle to 220C on my Anycubic Chiron, the filament performed well. The color is vibrant, and the matte finish looks professional.

Minimal print lines and good dimensional accuracy make it a worthwhile purchase.

5

Shipping

4

Item Quality

4

Customer Service

4

Packaging

My experience with the OVERTURE Matte PLA Filament was just okay. The packaging was excellent, and the filament was well-sealed. On my Prusa i3 MK3S, I faced nozzle clogging issues at first but fixed it by increasing the temperature to 220C and adjusting the bed to 65C.

The prints were clean with a decent matte finish, but it took some effort.

5

Shipping

5

Item Quality

4

Customer Service

5

Packaging