Recommended

I’ve tried various filament dryers over the years, and the Sovol SH02 Filament Dryer really stands out. The touch screen is user-friendly, and I love that it displays the internal humidity levels. I've only been using it for a few weeks, but so far, it's maintaining a steady 40-50C, which is perfect for my PLA and PETG filaments.

One tip: I’d recommend placing it on a glass worktop protector, as the base can get quite hot. The internal fan does an efficient job of circulating heat, and adding a few silica gel packs inside the filament spools helps manage excess moisture. This was definitely a good purchase for $

5

Shipping

5

Item Quality

4

Customer Service

5

Packaging

After reading multiple reviews, I decided to give the Sovol SH02 Filament Dryer a try, and I am mostly satisfied. The packaging was neat, and my order process was smooth. This filament dryer is compact yet has a sophisticated touch screen and PTC heater.

While it's great for drying my PLA and TPU spools, I did notice the silicone seal doesn't form a perfect closure, so I added some silica gel packs for extra protection. The unit heats well and evenly, but make sure you have it on a heat-resistant surface to avoid any issues. All in all, it’s a decent buy for the price!

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

So far, so good with the Sovol SH02 Filament Dryer. Got it for $62.89 and it's been a worthwhile investment for my 3D printing setup. Easy to set up with the touch screen controls and one key settings feature.

I usually use 75mm filaments like PLA and PETG, and they come out perfectly dry. It did get pretty hot on the bottom, so I'd suggest using a glass protector. Adding silica gel packs inside the filament spools for extra moisture absorption makes it even more effective.

4

Shipping

4

Item Quality

5

Customer Service

5

Packaging

Recommended

I've been using the Sovol SH02 Filament Dryer for a month now and I’m quite happy with it. The touch screen is intuitive and shows the humidity level inside, which helps a lot. It maintains a consistent 40-50C temperature, ideal for drying my PLA and ABS filaments. The order process was straightforward, and the device arrived well-packaged.

While the silicone seal could be better, putting some silica gel packs inside solves the issue of excess moisture. I would definitely recommend this dryer for anyone looking to improve their 3D printing quality.

4

Shipping

4

Item Quality

4

Customer Service

4

Packaging

Great service and fast shipping! The Sovol SH02 Filament Dryer is a nice kit that works exceptionally well for my 3D printing projects. The internal fan circulates heat efficiently, and my filament spools stay dry at 45C. The one key set feature is particularly handy. Make sure to place it on a heat-resistant surface since the bottom can get quite hot.

Using a few silica gel packs inside the spools for additional moisture control works like a charm. Very satisfied with this purchase for $

5

Shipping

5

Item Quality

4

Customer Service

5

Packaging

The Sovol SH02 Filament Dryer has really simplified my 3D printing process. It dries various types of filaments like PLA, PETG, and TPU reliably. The PTC heater ensures steady heat circulation, and the touch screen is straightforward to use.

Just be cautious about the unit getting hot on the underside; a glass worktop protector works well. Shipping was prompt, and the item was securely packaged. Adding silica gel packs to the filament spools helps with any minor sealing issues.

Overall, a worth-having gadget for serious 3D printing enthusiasts.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

Got the Sovol SH02 Filament Dryer recently and I'm quite impressed. The touch screen interface is easy to navigate, and it shows real-time humidity levels. It keeps the temperature stable between 40-50C, efficiently drying out my PLA and ABS filaments.

The only downside is that the silicone seal isn't perfect, so I insert a few silica gel packs just to be sure. The entire unit can get pretty hot, so a heat-resistant surface is a must. Great value for $62.89!

5

Shipping

4

Item Quality

5

Customer Service

5

Packaging

I purchased the Sovol SH02 Filament Dryer mostly for its innovative features, and it doesn't disappoint. The touch screen is a nice addition, making it simple to set up and monitor. The internal humidity display adds a layer of assurance that my filaments are adequately dried. However, the bottom unit gets quite hot, so I used a glass protector as a precaution.

I also put a few silica gel packs inside for extra moisture absorption. Excellent product and fairly priced.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

I wasn't expecting much, but the Sovol SH02 Filament Dryer has really exceeded my expectations. It provides a steady 45C with its PTC heater, perfect for my PLA and TPU filaments. The touch screen is user-friendly and allows for easy adjustments. The only minor issue is the silicone seal, which doesn’t lock perfectly.

Some silica gel packs help with that. The device does get hot at the bottom, so be careful where you place it. Overall, a solid piece of equipment for just $

4

Shipping

5

Item Quality

5

Customer Service

5

Packaging

Recommended

Overall, the Sovol SH02 Filament Dryer with its PTC heater and touch screen is an excellent addition to my 3D printing setup. It maintains a consistent internal temperature of 40-50C, efficiently drying filaments like PLA and PETG. The service was great, and the packaging kept everything intact.

One drawback is the less effective silicone seal, but adding silica gel packs inside the spools mitigates the issue. It’s also important to place the dryer on a heat-resistant surface as it gets pretty hot. Highly recommended!

5

Shipping

5

Item Quality

4

Customer Service

4

Packaging

This Sovol SH02 Filament Dryer is incredibly useful. It dries my filament spools uniformly at 45C, which greatly reduces print failures. The touch screen is simple to use, and the unit’s compact design fits perfectly in my workspace.

Just make sure to put it on a glass protector since the bottom tends to get hot. The silicone seal could be tighter, so I add silica gel packs for extra assurance. Definitely worth the investment of $

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

The Sovol SH02 Filament Dryer has been a game-changer for my 3D printing projects. It dries my PLA and TPU filaments effectively with its stable 40-50C temperature range. The touch screen is quite straightforward, and the one key set function is very practical.

I do place it on a glass worktop protector because it gets hot underneath. Also, using silica gel packs inside helps offset the less-than-perfect silicone seal. Overall, I’m very pleased with this purchase and its performance.

4

Shipping

5

Item Quality

4

Customer Service

4

Packaging

Quality-wise, the Sovol SH02 Filament Dryer is pretty good. It maintains optimal humidity and temperature for my PLA, PETG, and ABS filaments. The touch screen and control features are advanced yet easy to use.

The packaging was secure, and delivery was timely. Be sure to use a heat-resistant surface as the bottom of the unit heats up significantly. Moreover, adding silica gel packs enhances its effectiveness.

It’s a solid investment for anyone into 3D printing.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

The Sovol SH02 Filament Dryer functions well and is quite intuitive to use. The touch screen display shows real-time humidity, maintaining a steady 45C for reliable filament drying. Packaging was secure, and my order arrived promptly.

The silicone seal could be better, so I supplement with silica gel packs. Also, ensure it’s placed on a heat-resistant surface like a glass protector. Despite minor flaws, it’s a valuable tool for improving 3D print quality, especially for $

4

Shipping

4

Item Quality

4

Customer Service

5

Packaging

Just got the Sovol SH02 Filament Dryer and it’s already making a difference in my print quality. The touch screen is easy to navigate and the one key set feature is a significant plus. It maintains consistent internal temperature, drying my PLA and PETG filaments efficiently.

However, the base gets quite hot, so a heat-resistant surface is advised. The silicone seal isn’t perfect, but using silica gel packs helps. All things considered, it's a great addition to any 3D printing setup for $

4

Shipping

4

Item Quality

5

Customer Service

5

Packaging