The Zozen Chainsaw Mill is a good buy for the price. While the depth gauge requires a bit of tweaking with nuts, it works well once set up. The materials seem decent but may not withstand heavy, daily use.

It’s great for sporadic projects. With some minor improvements such as knurled knobs, it could be top-notch. I use it for casual milling, and it meets my needs.

The setup wasn't too difficult, and for $79.99, it's a solid investment.

4

Shipping

5

Item Quality

5

Customer Service

5

Packaging

Recommended

I’ve used this Zozen Chainsaw Mill with a Husqvarna 460 and it’s been smooth. The cutting guide system is efficient, and I like that I can run a bigger saw if I upgrade. Remember to use wedges for optimal cuts and check depth gauge markings as I had to look around due to opposite installation.

Despite minor quirks, it’s a good tool for moderate use, and I recommend this Alaskan mill.

5

Shipping

4

Item Quality

5

Customer Service

5

Packaging

This was my first time using an Alaskan Chainsaw Mill, and setup was straightforward after watching a few videos. However, it’s worth noting that you lose about 4 inches of cutting length when mounted. With a Stihl 311 and a 20-inch bar, I had to upgrade to a 25-inch bar for better results. The build is sturdy, but track extension set screws can vibrate loose, so I suggest using locktite.

Overall, a solid piece of equipment.

5

Shipping

5

Item Quality

5

Customer Service

4

Packaging

The affordable price of the Zozen Chainsaw Mill makes it a worthwhile buy. It does have a few ease-of-use issues like the plastic handled bolts vibrating out, but with some locktite, that problem can be mitigated. Its stable platform and lightweight frame ensure clean, straight cuts. The handle could be more user-friendly, but overall, I’m satisfied with its performance for casual milling tasks.

5

Shipping

4

Item Quality

5

Customer Service

5

Packaging

Using the Zozen Chainsaw Mill with a 24-inch bar on my Husqvarna Rancher 460, I managed to mill a couple of oak and maple logs without any major issues. The platform is stable and keeps cuts level. Adjustment of the cut height is simple with a standard chainsaw wrench. The depth gauge could use better markings, but it works fine once you get used to it.

A useful tool for weekend projects.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

Recommended

I purchased the Zozen Chainsaw Mill for some backyard milling projects and so far, I’m pleased. The portable sawmill is light yet solid, and the flexible cutting guide system helps achieve clean planks. I had to get additional mounting brackets for the rail system, but it worked without a hitch once installed.

Highly recommended for occasional use.

5

Shipping

5

Item Quality

4

Customer Service

5

Packaging

As a first-time user, I found the setup of the Zozen Chainsaw Mill quite manageable with online tutorials. It’s crucial to have a rail system for the first cut, which isn’t provided in this kit but can be purchased separately. Using a Stihl 311, I had to upgrade my bar to ensure effective cuts.

The materials and build quality are impressive for the price, but the track screws could benefit from some locktite to stay secure.

5

Shipping

5

Item Quality

4

Customer Service

5

Packaging

Bought the Zozen Chainsaw Mill primarily for occasional use. The handhold adjustment knob on one screw is handy, but the depth gauge adjustments could be more user-friendly. With a bit of patience, it does produce good results and is especially valuable for milling smaller logs. At $79.99, it offers decent value for the price.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

Recommended

Running this chainsaw mill with my 24-inch bar was easier than expected. The kit is well-designed but has some minor issues like plastic bolts vibrating out. Adding wedges during cuts helps keep everything in place.

A stable platform and ease of cut height adjustment make it useful even for beginners. Definitely recommend adding locktite for better performance.

5

Shipping

5

Item Quality

5

Customer Service

4

Packaging

For the price, the Zozen Chainsaw Mill is a decent choice. The build is sturdy, and I’ve milled several logs without trouble. The handle is a bit awkward, and I’d prefer it to be upright. Application of blue locktite on the screws is advisable as they tend to vibrate out.

With these adjustments, it works well for moderate DIY projects. Overall, a reliable purchase.

5

Shipping

4

Item Quality

5

Customer Service

5

Packaging

The Zozen Chainsaw Mill is an innovative tool for those who are into occasional woodworking projects. It’s easy to adjust the cut height, and the flexible guide system ensures precision. Using it, I found that the bolts for holding the handle might loosen over time, so some locktite is beneficial. It’s not perfect, but gets the job done for the price point.

5

Shipping

5

Item Quality

4

Customer Service

4

Packaging

I recently started using this chainsaw mill and am quite happy with its performance so far. With my Husqvarna 460, it provides stable, level cuts. One downside is the plastic bolts, which tend to loosen, but a bit of locktite solves that issue.

If you’re looking for an affordable milling option, this is worth considering.

4

Shipping

5

Item Quality

4

Customer Service

5

Packaging

After setting up the Zozen Chainsaw Mill, I was able to mill my first oak log. I had to figure out how to install the depth gauge properly as the markings were confusing initially. Still, the lightweight frame and stable platform are commendable.

For under $80, it’s a valuable tool for hobbyists and casual users.

5

Shipping

5

Item Quality

5

Customer Service

5

Packaging

The Zozen Chainsaw Mill works quite well with my Stihl 311 after bar upgrades. I lost some cutting width due to the mount system, but the mill is sturdy and efficient once set up. Wedges during cuts are essential and help keep the whole setup stable.

A good mill for the money, just with a few tweaks needed.

4

Shipping

4

Item Quality

5

Customer Service

5

Packaging

Using this chainsaw mill, I managed to cut several planks from maple and oak logs. The depth gauge does require some getting used to, and I suggest using extra wedges for stability. Overall, a reliable and affordable tool for occasional use.

Be sure to secure bolts with locktite to avoid vibrations loosening them. For $79.99, it’s a good option for the casual woodworker.

5

Shipping

5

Item Quality

4

Customer Service

4

Packaging